Facebook Twitter Youtube Instagram Pinterest
Sikadur 55 LP IN Price in Bangladesh

Sikadur 55 LP IN Price in Bangladesh

2,600.00৳ 

Sikadur 55 LP IN

Low viscosity, moisture tolerant epoxy injection resin and crack sealer

DESCRIPTION:

Sikadur 55 LP IN is a two part, low viscosity, moisture insensitive injection liquid, based on high strength epoxy resin specifically formulated for dry or damp crack sealing. Suitable for use in hot and tropical climatic conditions. Confirms to ASTM C881, Type II and IV, Grade-1, Class F.

USES:

  • To repair cracks by injection in structural concrete in slabs, columns, beams, walls, foundations, etc.
  • For surface treatment of cracks in interior and exterior slabs.
  • For roof slabs, parking lots and structures exposed to pedestrian and vehicular traffic.
Call Now : +88 01967256385

Sikadur 55 LP IN

Low viscosity, moisture tolerant epoxy injection resin and crack sealer

DESCRIPTION:

Sikadur 55 LP IN is a two part, low viscosity, moisture insensitive injection liquid, based on high strength epoxy resin specifically formulated for dry or damp crack sealing. Suitable for use in hot and tropical climatic conditions. Confirms to ASTM C881, Type II and IV, Grade-1, Class F.

USES:

  • To repair cracks by injection in structural concrete in slabs, columns, beams, walls, foundations, etc.
  • For surface treatment of cracks in interior and exterior slabs.
  • For roof slabs, parking lots and structures exposed to pedestrian and vehicular traffic.
 

CHARACTERISTICS / ADVANTAGES:

  • Solvent-free
  • Suitable for both, dry and damp conditions
  • Usable at high temperatures
  • Shrinkage free hardening
  • High mechanical strengths
  • High bond strength even in wet cracks Hard but not brittle
  • Low viscosity
  • Injectable with single component pumps

PRODUCT INFORMATION:

Sikadur 55 LP IN
Sikadur 55 LP IN

BASIS OF PRODUCT DATA:

All technical data stated in this Product Data Sheet are based on laboratory tests. Actual measured data may vary due to circumstances beyond our control.

ECOLOGY, HEALTH AND SAFETY:

For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the most recent Safety Data Sheet (SDS) containing physical, ecological, toxicological and other safety-related data.

APPLICATION INSTRUCTIONS:

SUBSTRATE QUALITY

Substrates must be sound, clean, free from oil and grease, old coatings and surface treatments etc.

SUBSTRATE PREPARATION

Concrete, mortar, stone should be thoroughly prepared by high pressure water jetting or mechanical means such as grinding, chiseling etc. Cracks must be cleaned to remove dust by using compressed air.

MIXING

Pre-batched packaging:

  • 1. Add all of Part B to Part A.
  • Mix with an electric mixer at slow speed (max. 250 rpm) for at least 3 minutes. Avoid entraining air.

Bulk packaging:

IMPORTANT
  • Part mixing is recommended. Add both parts in the correct proportion into suitable clean and dry container, mix in the same way as for the pre-batched units.

APPLICATION:

Impregnation of cracks in horizontal planes: Saturate the crack by applying the product by paint brush or roller in several passes or by pouring between two "barriers" made with Sikaflex sealant. The crack penetrating through structure must be sealed on the underside with Sikadur 31 IN epoxy mortar or a suitable Sika® cementitious mortars.Injection of cracks on horizontal / vertical planes: Sikadur 55 LP IN can be injected under pressure into cracks using a single-component injection pump. The injectors should be placed at a distance of 25 cm and the fissure between sections of injectors should be superficially sealed with Sikadur 31 to avoid the loss of resin during the injection process. Vertical cracks must be injected from the bottom up. As soon as the resin oozes through the next injector, the first must be sealed and continue the injection process from the next. After completing the injection process, the injectors and sealing material can be removed.IMPORTANT Maximum width of cracks to be injected: 5 mm. Please contact Fortimix Construction Technical Services for cracks > 5 mm. Facebook Page Visit

CLEANING OF EQUIPMENT:

Clean all tools and application equipment with Sika Colma-Cleaner immediately after use. Hardened or cured material can only be mechanically removed.

Related products

Terms & Condition

Welcome to Fortimix BD Construction! By accessing and using our website, you agree to comply with the following terms and conditions. Please take a moment to carefully read them, as they govern your use of this site and our services.

1. General Information Fortimix BD Construction is a trusted partner offering comprehensive construction solutions. By using our website, you acknowledge and accept these terms and conditions as well as any applicable laws or regulations that govern the use of this site.

2. Scope of Services Our company provides a wide range of construction services, including but not limited to residential, commercial, and industrial projects. For more details about specific services, please refer to the dedicated sections on our website.

3. Usage of the Website You agree to use the website for lawful purposes only. Any misuse of our website, including attempting to breach its security or transmit harmful content, is strictly prohibited. You are responsible for ensuring that all information you provide is accurate and up-to-date.

4. Content Ownership All content on this website, including text, images, graphics, and logos, is the property of Fortimix BD Construction and is protected by intellectual property laws. Unauthorized use or reproduction of any content is prohibited.

5. Privacy Policy Your privacy is important to us. Please refer to our Privacy Policy for detailed information on how we collect, use, and protect your personal information.

6. Payment Terms For any services rendered by Fortimix BD Construction, payment terms will be outlined in the specific contract or agreement signed between the client and the company. Payments are due as per the terms outlined in each project agreement.

7. Liability Disclaimer While we make every effort to ensure the accuracy of the information on our website, Fortimix BD Construction does not guarantee the completeness, reliability, or accuracy of the content provided. You agree that any reliance on such content is at your own risk.

8. Project Termination and Cancellations We strive for excellence and on-time delivery. However, if for any reason a project needs to be canceled or delayed, both parties will mutually agree on the terms for such actions. For construction projects, any cancellations or changes will be subject to the terms stated in the contract.

9. Third-Party Links Our website may contain links to third-party websites. These links are provided for your convenience. Fortimix BD Construction does not endorse and is not responsible for the content, products, or services offered on these external sites.

10. Changes to Terms and Conditions We reserve the right to update, modify, or revise these terms and conditions at any time. Any changes will be reflected on this page with an updated “Last Modified” date. It is your responsibility to check these terms periodically to stay informed of any changes.

11. Dispute Resolution Any dispute arising from the use of this website or services provided by Fortimix BD Construction shall be resolved through negotiation. If a resolution cannot be reached, both parties agree to settle the dispute through arbitration in accordance with the laws of Bangladesh.

12. Governing Law These terms and conditions shall be governed by and construed in accordance with the laws of Bangladesh.

By continuing to use the website, you agree to these terms and conditions. If you do not agree, please refrain from using the website or any of the services provided by Fortimix BD Construction.

Thank you for choosing Fortimix BD Construction – Your trusted partner in delivering quality construction solutions.