Facebook Twitter Youtube Instagram Pinterest
Conbextra GP2 BD Price
Conbextra GP2

Conbextra GP2 BD Price

1,250.00৳ 

Conbextra GP2 BD Price

Free flow, high strength, non-shrink, cementitious precision grout

Description

Conbextra GP2 is supplied as a ready to use dry powder. The addition of a controlled amount of clean water produces a free flowing, non-shrink grout for gap thicknesses up to 100mm. Conbextra GP2 is a blend of Portland cement, graded fillers and chemical additives which impart controlled expansion in the plastic state whilst minimizing water demand. The low water demand ensures high early strength. The graded fillers are designed to assist uniform mixing and produce a consistent grout.

Advantages

  •  Gaseous expansion system compensates for shrinkage and settlement in the plastic state
  • No metallic iron content to cause staining
  • Pre-packed material overcomes onsite batching variations
  • Develops high early strength without the use of chlorides
  • High ultimate strength ensure the durability of the hardened grout
  • Free flow ensures high level of contact with load bearing area
Call Now : +88 01967256385

Conbextra GP2 BD Price

Free flow, high strength, non-shrink, cementitious precision groutForitiMix BD Construction:-

Uses

Conbextra GP2 is used for precision grouting where it is essential to withstand static and dynamic loads. Typical applications would be the grouting of base plates of turbines, compressors, boiler feed pumps etc., It can also be used for anchoring a wide range of fixings. These include masts, anchor bolts and fence posts.
Conbextra GP2 BD Price
Conbextra GP2 BD Price

Advantages

  •  Gaseous expansion system compensates for shrinkage and settlement in the plastic state
  • No metallic iron content to cause staining
  • Pre-packed material overcomes onsite batching variations
  • Develops high early strength without the use of chlorides
  • High ultimate strength ensure the durability of the hardened grout
  • Free flow ensures high level of contact with load bearing area

Description

Conbextra GP2 is supplied as a ready to use dry powder. The addition of a controlled amount of clean water produces a free flowing, non-shrink grout for gap thicknesses up to 100mm. Conbextra GP2 is a blend of Portland cement, graded fillers and chemical additives which impart controlled expansion in the plastic state whilst minimizing water demand. The low water demand ensures high early strength. The graded fillers are designed to assist uniform mixing and produce a consistent grout.

Application instructions

Preparation

Foundation surface

The substrate surface must be free from oil, grease or any loosely adherent material. If the concrete surface is defective or has laitence, it must be cut back to a sound base. Bolt holes and fixing pockets must be blown clean of any dirt or debris.

Pre-soaking

  • Several hours prior to placing, the concrete substrates should be saturated with fresh water.
  • Immediately before grouting takes place any free water should be removed with particular care being taken to blow out all bolt holes and pockets.

Base plate

  • It is essential that this is clean and free from oil, grease or scale. Air pressure relief holes should be provided to allow venting of any isolated high spots.

Levelling shims

  • If these are to be removed after the grout has hardened, they should be treated with a thin layer of grease.

Formwork

The formwork should be constructed to be leakproof. This can be achieved by using foam rubber strip or mastic sealant beneath the constructed formwork and between joints. In some cases it is practical to use a sacrificial semi-dry sand and cement formwork. The formwork should include outlets for pre-soaking.

Unrestrained surface area

This must be kept to a minimum. Generally the gap width between the perimeter formwork and the plate edge should not exceed 150mm on the pouring side and 50mm on the op  posite side. It is advisable, where practical, to have no gap at the flank sides.

Mixing and placing

Mixing

For best results a mechanically powered grout mixer should be used. When quantities up to 50kg are used, a heavy duty slow speed drill (400-500 rpm) fitted with a paddle is suitable.. Larger quantities will require a heavy duty mixer. To enable the grouting operation to be carried out continu-ously, it is essential that sufficient mixing capacity and labor are available. The use of a grout holding tank with provision to gently agitate the grout may be required.

Storage Shelf life

Conbextra GP2 has a shelf life of 6 months if kept in a dry store in sealed bags. If stored in high temperature and high humidity locations, the shelf life may be reduced.

Estimating Packaging

Conbextra GP2 is supplied in 25 kg moisture resistant bags.
Conbextra GP2
Conbextra GP2

Precautions

Health and Safety instructions

Conbextra GP2 is alkaline and should not come into contact with skin and eyes. Inhalation of dust during mixing should be avoided. Gloves, goggles and dust mask should be worn. If contact with skin occurs, it shall be washed with water. Splashes to eyes should be washed immediately with plenty of clean water and medical advice sought.

Fire

Conbextra GP2 is non flammable.

Additional information

For further details about the use and selection of grouts refer to the Fosroc Information module entitled ‘Precision grouting in the Construction industry’.

Related products

Terms & Condition

Welcome to Fortimix BD Construction! By accessing and using our website, you agree to comply with the following terms and conditions. Please take a moment to carefully read them, as they govern your use of this site and our services.

1. General Information Fortimix BD Construction is a trusted partner offering comprehensive construction solutions. By using our website, you acknowledge and accept these terms and conditions as well as any applicable laws or regulations that govern the use of this site.

2. Scope of Services Our company provides a wide range of construction services, including but not limited to residential, commercial, and industrial projects. For more details about specific services, please refer to the dedicated sections on our website.

3. Usage of the Website You agree to use the website for lawful purposes only. Any misuse of our website, including attempting to breach its security or transmit harmful content, is strictly prohibited. You are responsible for ensuring that all information you provide is accurate and up-to-date.

4. Content Ownership All content on this website, including text, images, graphics, and logos, is the property of Fortimix BD Construction and is protected by intellectual property laws. Unauthorized use or reproduction of any content is prohibited.

5. Privacy Policy Your privacy is important to us. Please refer to our Privacy Policy for detailed information on how we collect, use, and protect your personal information.

6. Payment Terms For any services rendered by Fortimix BD Construction, payment terms will be outlined in the specific contract or agreement signed between the client and the company. Payments are due as per the terms outlined in each project agreement.

7. Liability Disclaimer While we make every effort to ensure the accuracy of the information on our website, Fortimix BD Construction does not guarantee the completeness, reliability, or accuracy of the content provided. You agree that any reliance on such content is at your own risk.

8. Project Termination and Cancellations We strive for excellence and on-time delivery. However, if for any reason a project needs to be canceled or delayed, both parties will mutually agree on the terms for such actions. For construction projects, any cancellations or changes will be subject to the terms stated in the contract.

9. Third-Party Links Our website may contain links to third-party websites. These links are provided for your convenience. Fortimix BD Construction does not endorse and is not responsible for the content, products, or services offered on these external sites.

10. Changes to Terms and Conditions We reserve the right to update, modify, or revise these terms and conditions at any time. Any changes will be reflected on this page with an updated “Last Modified” date. It is your responsibility to check these terms periodically to stay informed of any changes.

11. Dispute Resolution Any dispute arising from the use of this website or services provided by Fortimix BD Construction shall be resolved through negotiation. If a resolution cannot be reached, both parties agree to settle the dispute through arbitration in accordance with the laws of Bangladesh.

12. Governing Law These terms and conditions shall be governed by and construed in accordance with the laws of Bangladesh.

By continuing to use the website, you agree to these terms and conditions. If you do not agree, please refrain from using the website or any of the services provided by Fortimix BD Construction.

Thank you for choosing Fortimix BD Construction – Your trusted partner in delivering quality construction solutions.